PVD coatings: individual for your application

PVD coatings (Physical Vapor Deposition) have been established for years in almost all markets and industries to improve the durability and performance of tools and components of all kinds.

PVD coatings are created in a high vacuum by converting metal into a vaporous state and simultaneously adding a reaction gas. With different temperatures (from 200 ° C) we can deposit layers of 2-8 µm.

Our in-house research and development department has developed numerous successful PVD coatings in recent years and presented them to the market, which have always resulted from market and customer needs. With our many years of know-how and our proximity to our sister companies, we have a deep insight into the entire value chain, which extends from the material to the finished tool.

In the field of PVD coatings, we are one of the leading suppliers and service providers worldwide and can offer our services in numerous industries and segments.

Our product solutions are based on your needs and problems.

Get in touch with us now to find the right solution for you.

  • Combination with friction-reducing layers possible
  • variable layer structure (nanostructures, multilayer, monolayer)
  • chemical and mechanical decoating possible
  • very good adhesion to the substrate
  • very good impression of textured and polished surfaces
  • very good dimensional accuracy and contour accuracy
  • no hardness drop
  • no influence on the microstructure with suitable material selection

Overview of our product solutions

Do you already know which of our PVD coatings is suitable for your request or would you like to make a comparison between your previous service provider and us? Please get an overview of our products below.

Please do not hesitate to contact us if you have any questions or need advice. We take your individual application into account and work with you to find the best possible solution.

Übersicht PVD-Beschichtungen

PVD coating Hardness (HV) max. application temperature (°C) Friction coeff. against steel Coating thicknesses (µm) Colour Applications Further informations
CARBON-X® 2.400 ± 400 325 0,05 – 0,15 1,5 – 2,5 black-gray
  • Machining
  • Cutting / forming
  • Plastic injection molding
  • Components
Productinformations
CARBON-X®-AL 2.400 ± 400 325 0,05 – 0,1 3 – 4 dark-grey
  • Forming
Productinformations
CrN 2.000 ± 600 600 0,3 – 0,4 1 – 6 slate-grey
  • Machining
  • Punching / forming
  • Plastic injection molding
Productinformations
CrCN 2.300 ± 200 600 0,2 – 0,4 2 – 6 silver-grey
  • Machining
  • Punching / forming
  • Plastic injection molding
Productinformations
CrN Multilayer 2.000 ± 200 600 0,3 – 0,4 2 – 6 silver-grey
  • Plastic injection molding
  • Punching / forming
  • Magnesium die-casting
Productinformations
CROSAL®-plus 3.200 ± 300 1.100 0,45 2 – 5 slate-grey
  • Machining
  • Punching / forming
Productinformations
DUMATIC® 3.700 ± 500 Toplayer

2.600 ± 300 Layer composite

400 0,25 3 – 5 red/grey
  • Punching / forming
Productinformations
Duplex-VARIANTIC® 3.500 ± 500 800 0,2 4 – 6 dusky-pink
  • Forming
  • Punching
Productinformations
Duplex-VARIANTIC®-1000 4.000 ± 200 800 0,6 – 0,7 8 –  9 dark red-gold
  • Forming
Productinformations
Duplex-VARIANTIC®-1400 3.000 ± 200 800 0,6 – 0,7 5 – 7 gold
  • Forming
  • Punching / cutting
Productinformations
EXXTRAL® 3.300 ± 300 800 0,7 2 – 5 anthrazit
  • Machining
  • Punching / forming
  • Plastic injection molding
Productinformations
EXXTRAL®-plus 3.300 ± 300 800 0,7 2 – 5 anthrazit
  • Machining
  • Punching / forming
  • Plastic injection molding
Productinformations
EXXTRAL®-silver 3.300 ± 300 800 0,4 2 – 4 silver
  • Machining
  • Forming
Productinformations
EXXTRAL®-ultrafine 3.300 ± 300 800 2 – 3 anthrazit
  • Machining
Productinformations
MoX2® < 500 400 0,1 1 anthrazit
  • Machining
  • Forming / cutting tools
Productinformations
SISTRAL® 2.500 ± 300 900 0,7 1 – 4 anthrazit
  • Machining
  • Punching
Productinformations
SISTRAL®-plus 2.800 ± 300 900 0,7 – 0,8 2 – 4 petrol
  • Machining
  • Hard machining
Productinformations
SISTRAL®-ultrafine 2.500 ± 300 900 2 – 3 anthrazit-blue
  • Machining
Productinformations
SISTRAL®-Gold 3.000 ± 500 900 0,6 1 – 4 gold
  • Machining
Productinformations
SUBLIME® 3.300 ± 200 1.100 0,7 – 0,8 2 – 4 ± 1 grey
  • Gear manufacturing
Productinformations
SUCASLIDE® 1.000 – 1.200 400 0,05 – 0,1 1,5 – 2,5 black
  • Punching / forming
  • Machining
  • Plastic injection molding
  • Components
Productinformations
SUPRAL 3.500 ± 500 800 < 0,5 2 – 5 black
  • Machining
  • Punching
Productinformations
TiCN 3.500 ± 500 400 0,2 1 – 4 blue-gray
  • Machining
  • Punching / forming
  • Plastic injection molding
Productinformations
TiCN-ultrafine 3.500 ± 500 400 1 – 4 anthrazit-blue
  • Machining
  • Forming
Productinformations
TIGRAL® 3.300 ± 300 900 0,6 1 – 4 dark-grey
  • Punching / forming
  • Die-cast aluminum
Productinformations
TiN 2.300 ± 300 500 0,6 1 – 4 gold
  • Machining
  • Punching / forming
  • Plastic injection molding
Productinformations
TiN-ultrafine 2.800 ± 150 500 2 – 4 gold
  • Machining
  • Punching / forming
  • Plastic injection molding
Productinformations
TOPMATIC® 2.800 ± 300 700 0,6 5 – 10 aubergine
  • Forming / cutting
Productinformations
VARIANTIC® 3.500 ± 500 800 0,2 2 – 4 dusky-pink
  • Machining
  • Punching / forming
Productinformations
ZrCN 3.100 ± 300 600 0,5 1 – 4 brown-silver
  • Machining
  • Punching / forming
Productinformations
ZrN 2.800 ± 300 600 0,5 1 – 4 light-yellow
  • Machining
  • Punching / forming
Productinformations

Technical application support

Düsseldorf

T: +4921197076-0

F: +4921197076-955

Technical application support

Ettlingen

T: +4972435778-0

F: +4972435778-20

Technical application support

Schnaittach

T: +4991539227-0

F: +4991539227-65

Technical application support

Salzgitter

T: +4953412232-0

F: +4953412232-14